Optical to Copper Aggregator nTAP

Technical Specifications

Optical to Copper Aggregator nTAP

Dimensions

Depth 7.66 in / 19.46 cm
Width (faceplate front) 5.85 in / 14.86 cm
Width (back) 4.55 in / 11.56 cm
Height (faceplate) 1.10 in / 2.79 cm

Options

Multimode (62.5 μm) Multimode (50 μm) Single-mode (9 μm)

Optical Specs

Maximum Insertion Losses (dB)

Split Ratio Multimode 62.5 μm Multimode 50 μm Single-mode 9 μm
  (1300 nm) (850 nm) (1300 nm) (850 nm) (1310/1550 nm)
50/50 3.9/3.9 dB 4.7/4.7 dB 4.5/4.5 dB 5.5/5.5 dB 3.6/3.6 dB
60/40 3.0/5.0 3.8/5.7 3.7/5.6 4.7/6.6 2.8/4.8
70/30 2.3/6.3 3.0/7.0 2.9/7.0 3.9/8.0 2.0/6.1
80/20 1.7/8.3 2.4/9.0 2.3/9.0 3.2/10.0 1.3/8.0
90/10 1.2/12 1.9/12.5 1.8/12.8 2.7/13.5 .8/12.0

Supported Media

Fiber type Multimode Single-mode
Connector LC LC
Fiber Diameter(s) 50 μm or 62.5 μm 9 μm
Wavelength Ranges (dual window) 850 nm or 1300 nm 1310 nm or 1550 nm

Environmental Requirements

Specification Operational Range
Temperature Range (operating) -40° to 185° (F) / -40° to 85° (C)
Temperature Range (storage) -52° to 185° (F) / -47° to 85° (C)

Copper Specs

Supported Media

Interface Media
Link A/Link B (Link under test) RJ45
Copper Analyzer Interface RJ45

Environmental Requirements

Specification Operational Range  Storage Range
Temperature range 32° to 120°F / 0° to 55 °C  32° - 167°F / 0° - 75°C
Humidity 35-85% (non-condensating)

Power Requirements

Specification Measurement/Value
AC Input 90 V to 264 V, 47 Hz to 63 Hz
Operational Voltage 5 V (+10% to -5%, < 100 mV ripple)
Operational Current Typical: <= 1.8 amps  Max: <= 2.8 amps
Power Dissipation Typical: 8 W  Max: 14 W

Regulatory Compliance

Specification Certification
Emissions FCC Part 15 Class B
CE Mark EN61000-3-2, EN55024, EN55022A